If you want to fix a leaking tap mixer, you can easily replace the parts of the faucet and prevent it from dripping. To make this task easier, you must turn off the water supply at the valves located under the sink. After removing the leaking parts, replace them with new ones of the same size and thickness. Then, test the dripping faucet by turning on the water supply.

The first step in fixing a leaking bathroom faucet handle is to remove the cap and sand the seat. To replace a bonnet washer, you should remove the old bonnet washer and then apply pipe joint compound on its threads. Grease the threads of the escutcheon and handle. When all the parts are clean, reassemble the faucet and test the water pressure. Then, check if the handle is still leaking.

Weld nut and stem

Next, you should remove the packing nut and the stem. These parts are welded to the stem because of corrosion. To remove the handle, you must turn off the water supply under the sink and remove the escutcheon cap. You may need to use a small pocketknife to sand the seat and the threads. After removing the handle, make sure to check each part to make sure it is intact and free of any damage. If you are unsure of how to fix leaking bathroom faucet handle, you can heat it with a hair dryer. Be careful not to pull too hard as you could break it.

Carry way the old seat and bonnet previously install

After the sanding, you can now proceed to install the new seat washer and bonnet washer. Before installing the new handles, you need to remove the old seats and bonnets. Afterwards, you have to install the new escutcheon cap and the handle. Once you have reassembled the faucet, you need to reinstall the escutcheon and the handle.

Dismantle the faucet

The first step to fix leaking bathroom faucet handle is to dismantle it. Taking apart the faucet is not a difficult job. Then, you can clean the seat by cleaning it with a scouring pad. You may also need to dismantle the supply lines. If you don’t feel comfortable doing it, you can call a plumber. Then, you need to clean the parts of the faucet.

To fix leaking bathroom faucet handle, first you need to dismantle the faucet. It may be difficult to remove the handle because the corrosion will have welddened the handle to the stem. Firstly, you need to shut off the water supply. Then, remove the screw holding the handle. If you don’t have this kind of tool, you can use a hair dryer to warm it up and free it.

Welcome to WordPress! This is your first post. Edit or delete it to take the first step in your blogging journey.